Corporate Training Schedule
  through September 2015!
 

Download the pdf version here!
   
Register by Phone today!
Call 1-800-998-1621, then press 7 for "Training & Events"
 
Prices subject to change without notice. Registration must be accompanied with a valid PO# or credit card to ensure a seat.
 
Sort items by: 
 
Basic Industrial Electrical Theory I (Level 1) (FEMS - LEVEL 1)
Event Date(s) & Time(s):  08/06/2015   |   8:00am- 12:00pm
Location:
  850 Smile Way, York PA 17404
Course Description:  The Fundamental Electrical Maintenance Skills classes provide a foundation for electrical workers, maintenance and others, to better understand electrical systems and controls.  The classes provide a basic knowledge base from which to build a better understanding of electrical distribution systems, motion systems and machine control.  The classes build upon each other to form a well rounded set of fundamental principles on which all electrical and electronic systems are built.  These classes provide a good starting point for an individual interested in gaining an understanding of Ohm's Law, Power, Energy, Inductance, Capacitance, Power Factor, Electrical Components, Electrical Symbols, Electrical Schematics, Induction Motors, Ladder Logic, Panel Wiring and much more. Call for session specifics!
Cost Per Person:  $180.00

Register Today:  E-mail training@sydist.com or call 1-800-998-1621, then press 7.


Basic Industrial Electrical Theory II (Level 2) (FEMS - LEVEL 2)
Event Date(s) & Time(s):  08/06/2015   |   1pm- 5pm
Location:
  850 Smile Way, York PA 17404
Course Description:  The Fundamental Electrical Maintenance Skills classes provide a foundation for electrical workers, maintenance and others, to better understand electrical systems and controls.  The classes provide a basic knowledge base from which to build a better understanding of electrical distribution systems, motion systems and machine control.  The classes build upon each other to form a well rounded set of fundamental principles on which all electrical and electronic systems are built.  These classes provide a good starting point for an individual interested in gaining an understanding of Ohm's Law, Power, Energy, Inductance, Capacitance, Power Factor, Electrical Components, Electrical Symbols, Electrical Schematics, Induction Motors, Ladder Logic, Panel Wiring and much more. Call for session specifics!
Cost Per Person:  $180.00

Register Today:  E-mail training@sydist.com or call 1-800-998-1621, then press 7.


Studio 5000 Level 3: Developing Logix5000 Systems (CCP143)
Event Date(s) & Time(s):  08/11/2015 - 08/14/2015   |   8:30am-4:30pm
Location:
  3982 Paxton Street, Harrisburg PA 17111
Course Description:  This course is designed for programmers who are familiar with general ladder logic and controller concepts but new to the Logix5000 system. Building on your basic ladder logic programming experience, this course covers configuration and programming tasks specific to Logix5000 systems. This course also introduces the many Logix5000 communications networks including Serial, ControlNet™, and Ethernet networks for online communications. You will also use ControlNet Producer/Consumer technology to multicast input devices, share data between controllers, and control remote I/O.
Cost Per Person:  $2,070.00

Register Today:  E-mail training@sydist.com or call 1-800-998-1621, then press 7.


Industrial Electrical Math (Level 3) (FEMS - LEVEL 3)
Event Date(s) & Time(s):  08/13/2015   |   8:00am- 12:00pm
Location:
  850 Smile Way, York PA 17404
Course Description:  The Fundamental Electrical Maintenance Skills classes provide a foundation for electrical workers, maintenance and others, to better understand electrical systems and controls.  The classes provide a basic knowledge base from which to build a better understanding of electrical distribution systems, motion systems and machine control.  The classes build upon each other to form a well rounded set of fundamental principles on which all electrical and electronic systems are built.  These classes provide a good starting point for an individual interested in gaining an understanding of Ohm's Law, Power, Energy, Inductance, Capacitance, Power Factor, Electrical Components, Electrical Symbols, Electrical Schematics, Induction Motors, Ladder Logic, Panel Wiring and much more. Call for session specifics!
Cost Per Person:  $180.00

Register Today:  E-mail training@sydist.com or call 1-800-998-1621, then press 7.


Using Multimeters (Level 4) (FEMS - LEVEL 4)
Event Date(s) & Time(s):  08/13/2015   |   1pm- 5pm
Location:
  850 Smile Way, York PA 17404
Course Description:  The Fundamental Electrical Maintenance Skills classes provide a foundation for electrical workers, maintenance and others, to better understand electrical systems and controls.  The classes provide a basic knowledge base from which to build a better understanding of electrical distribution systems, motion systems and machine control.  The classes build upon each other to form a well rounded set of fundamental principles on which all electrical and electronic systems are built.  These classes provide a good starting point for an individual interested in gaining an understanding of Ohm's Law, Power, Energy, Inductance, Capacitance, Power Factor, Electrical Components, Electrical Symbols, Electrical Schematics, Induction Motors, Ladder Logic, Panel Wiring and much more. Call for session specifics!
Cost Per Person:  $180.00

Register Today:  E-mail training@sydist.com or call 1-800-998-1621, then press 7.


SLC 500 and RSLogix 500 Maintenance and Troubleshooting (CCPS43)
Event Date(s) & Time(s):  08/18/2015 - 08/21/2015   |   8:30am-4:30pm
Location:
  850 Smile Way, York PA 17404
Course Description:  This class provides you fast and effective procedures for isolating and correcting problems with SLC 500 systems using RSLogix software. The instructor will demonstrate each procedure in detail, then provide realistic situations that allow students to practice that procedure. This course focuses upon the SLC 500 system hardware, work activities associated with ladder logic program maintenance (i.e. editing, saving, restoring, making back up copies, etc.), interpreting ladder logic instructions, and isolating problems in a SLC 500 system using RSLogix 500 software.
Cost Per Person:  $2,070.00

Register Today:  E-mail training@sydist.com or call 1-800-998-1621, then press 7.


Component Identification (Level 6) (FEMS - LEVEL 6)
Event Date(s) & Time(s):  09/03/2015   |   1pm- 5pm
Location:
  850 Smile Way, York PA 17404
Course Description:  The Fundamental Electrical Maintenance Skills classes provide a foundation for electrical workers, maintenance and others, to better understand electrical systems and controls.  The classes provide a basic knowledge base from which to build a better understanding of electrical distribution systems, motion systems and machine control.  The classes build upon each other to form a well rounded set of fundamental principles on which all electrical and electronic systems are built.  These classes provide a good starting point for an individual interested in gaining an understanding of Ohm's Law, Power, Energy, Inductance, Capacitance, Power Factor, Electrical Components, Electrical Symbols, Electrical Schematics, Induction Motors, Ladder Logic, Panel Wiring and much more. Call for session specifics!
Cost Per Person:  $180.00

Register Today:  E-mail training@sydist.com or call 1-800-998-1621, then press 7.


Reading Electrical Schematics (Level 5) (FEMS - LEVEL 5)
Event Date(s) & Time(s):  09/03/2015   |   8:00am- 12:00pm
Location:
  850 Smile Way, York PA 17404
Course Description:  The Fundamental Electrical Maintenance Skills classes provide a foundation for electrical workers, maintenance and others, to better understand electrical systems and controls.  The classes provide a basic knowledge base from which to build a better understanding of electrical distribution systems, motion systems and machine control.  The classes build upon each other to form a well rounded set of fundamental principles on which all electrical and electronic systems are built.  These classes provide a good starting point for an individual interested in gaining an understanding of Ohm's Law, Power, Energy, Inductance, Capacitance, Power Factor, Electrical Components, Electrical Symbols, Electrical Schematics, Induction Motors, Ladder Logic, Panel Wiring and much more. Call for session specifics!
Cost Per Person:  $180.00

Register Today:  E-mail training@sydist.com or call 1-800-998-1621, then press 7.


PLC5/SLC 500 & RSLogix Fundamentals (CCP122)
Event Date(s) & Time(s):  09/09/2015 - 09/10/2015   |   8:30am-4:30pm
Location:
  2929 Stewart Drive Suite 103, State College PA 16801
Course Description:  This course introduces you to a Control System and Programmable Controllers. This course gives you an overview of how each component of a Control System functions. It also provides you with a strong foundation of simple skills needed to accomplish work related to programmable controller systems. You will become competent with identifying the different features on programmable controller systems. You will become competent with identifying the different features on programmable controllers and interpreting simple ladder logic. Hands-on exercises in entering ladder diagrams using Allen-Bradley programmable controller programming software are a part of the course.
Cost Per Person:  $1,240.00

Register Today:  E-mail training@sydist.com or call 1-800-998-1621, then press 7.


Basic Industrial Electrical Theory III (Level 7) (FEMS - LEVEL 7)
Event Date(s) & Time(s):  09/10/2015   |   8:00am- 12:00pm
Location:
  850 Smile Way, York PA 17404
Course Description:  The Fundamental Electrical Maintenance Skills classes provide a foundation for electrical workers, maintenance and others, to better understand electrical systems and controls.  The classes provide a basic knowledge base from which to build a better understanding of electrical distribution systems, motion systems and machine control.  The classes build upon each other to form a well rounded set of fundamental principles on which all electrical and electronic systems are built.  These classes provide a good starting point for an individual interested in gaining an understanding of Ohm's Law, Power, Energy, Inductance, Capacitance, Power Factor, Electrical Components, Electrical Symbols, Electrical Schematics, Induction Motors, Ladder Logic, Panel Wiring and much more. Call for session specifics!
Cost Per Person:  $180.00

Register Today:  E-mail training@sydist.com or call 1-800-998-1621, then press 7.


Basic Industrial Electrical Theory IV (Level 8) (FEMS - LEVEL 8)
Event Date(s) & Time(s):  09/10/2015   |   1pm- 5pm
Location:
  850 Smile Way, York PA 17404
Course Description:  The Fundamental Electrical Maintenance Skills classes provide a foundation for electrical workers, maintenance and others, to better understand electrical systems and controls.  The classes provide a basic knowledge base from which to build a better understanding of electrical distribution systems, motion systems and machine control.  The classes build upon each other to form a well rounded set of fundamental principles on which all electrical and electronic systems are built.  These classes provide a good starting point for an individual interested in gaining an understanding of Ohm's Law, Power, Energy, Inductance, Capacitance, Power Factor, Electrical Components, Electrical Symbols, Electrical Schematics, Induction Motors, Ladder Logic, Panel Wiring and much more. Call for session specifics!
Cost Per Person:  $180.00

Register Today:  E-mail training@sydist.com or call 1-800-998-1621, then press 7.


IN250: BICSI ITS Installer 2 - Fiber Training (IN250)
Event Date(s) & Time(s):  09/14/2015 - 09/18/2015   |   8:00am-5:00pm
Location:
  850 Smile Way, York PA 17404
Course Description:  IN250 is a 5-day course setting the groundwork for optical fiber-based structured cabling system installation. The course will open with an overview of fiber transmission principles, professionalism, life safety and industry best practices, as related to fiber. A significant amount of course time will then be spent on installation, splicing, termination, testing and retrofitting of optical fiber cable. Additional topics covered will include pathways and spaces, firestopping and an introduction to field coordination.
Cost Per Person:  $1,980.00

Register Today:  E-mail training@sydist.com or call 1-800-998-1621, then press 7.


OSHA Electrical Safety and NFPA70E Certification (NFPA70E - CERT)
Event Date(s) & Time(s):  09/17/2015   |   8:30am-4:30pm
Location:
  2929 Stewart Drive Suite 103, State College PA 16801
Course Description:  This training will meet the basic Qualified person requirements identified by OSHA in 29CFR1910.332. Training will include hands-on activities including verification of voltage exercises and the completion of a post-assessment evaluation. The training is developed and provided by a Certified Industrial Hygienist/Certified Safety Professional and Registered Professional Engineer. Individuals successfully completing this course will receive certification in accordance with the Qualified person requirements as identified in OSHA/NFPA.
Cost Per Person:  $410.00

Register Today:  E-mail training@sydist.com or call 1-800-998-1621, then press 7.


Installer Level 2 - Fiber Written Exam (IN250 - EXAM)
Event Date(s) & Time(s):  09/19/2015   |   8:00am-12:00pm
Location:
  850 Smile Way, York PA 17404
Course Description:  Installer Level 2 Fiber - Written Exam
Cost Per Person:  $255.00

Register Today:  E-mail training@sydist.com or call 1-800-998-1621, then press 7.


FactoryTalk View SE Programming (CCV207)
Event Date(s) & Time(s):  09/21/2015 - 09/25/2015   |   Monday 1:00pm - 5:00 pm, Tuesday -Thursday 8:30am-4:30pm
Location:
  2929 Stewart Drive Suite 103, State College PA 16801
Course Description:  This course is a skill-building course that will aid you in developing FactoryTalk® View Site Edition (SE) applications. This course provides opportunities for you to work with local FactoryTalk View SE applications. During class, you will have the opportunity to practice the skills used to create an application and build graphic displays. You will learn how to configure alarms and security, trend data, and test your application using FactoryTalk View SE Client.
Cost Per Person:  $2,490.00

Register Today:  E-mail training@sydist.com or call 1-800-998-1621, then press 7.


SLC 500 and RSLogix 500 Maintenance and Troubleshooting (CCPS43)
Event Date(s) & Time(s):  09/22/2015 - 09/25/2015   |   8:30am-4:30pm
Location:
  3982 Paxton Street, Harrisburg PA 17111
Course Description:  This class provides you fast and effective procedures for isolating and correcting problems with SLC 500 systems using RSLogix software. The instructor will demonstrate each procedure in detail, then provide realistic situations that allow students to practice that procedure. This course focuses upon the SLC 500 system hardware, work activities associated with ladder logic program maintenance (i.e. editing, saving, restoring, making back up copies, etc.), interpreting ladder logic instructions, and isolating problems in a SLC 500 system using RSLogix 500 software.
Cost Per Person:  $2,070.00

Register Today:  E-mail training@sydist.com or call 1-800-998-1621, then press 7.


Transformers and Motors (Level 10) (FEMS - LEVEL 10)
Event Date(s) & Time(s):  09/24/2015   |   1pm- 5pm
Location:
  850 Smile Way, York PA 17404
Course Description:  The Fundamental Electrical Maintenance Skills classes provide a foundation for electrical workers, maintenance and others, to better understand electrical systems and controls.  The classes provide a basic knowledge base from which to build a better understanding of electrical distribution systems, motion systems and machine control.  The classes build upon each other to form a well rounded set of fundamental principles on which all electrical and electronic systems are built.  These classes provide a good starting point for an individual interested in gaining an understanding of Ohm's Law, Power, Energy, Inductance, Capacitance, Power Factor, Electrical Components, Electrical Symbols, Electrical Schematics, Induction Motors, Ladder Logic, Panel Wiring and much more. Call for session specifics!
Cost Per Person:  $180.00

Register Today:  E-mail training@sydist.com or call 1-800-998-1621, then press 7.


Understanding Ladder Logic (Level 9) (FEMS - LEVEL 9)
Event Date(s) & Time(s):  09/24/2015   |   8:00am- 12:00pm
Location:
  850 Smile Way, York PA 17404
Course Description:  The Fundamental Electrical Maintenance Skills classes provide a foundation for electrical workers, maintenance and others, to better understand electrical systems and controls.  The classes provide a basic knowledge base from which to build a better understanding of electrical distribution systems, motion systems and machine control.  The classes build upon each other to form a well rounded set of fundamental principles on which all electrical and electronic systems are built.  These classes provide a good starting point for an individual interested in gaining an understanding of Ohm's Law, Power, Energy, Inductance, Capacitance, Power Factor, Electrical Components, Electrical Symbols, Electrical Schematics, Induction Motors, Ladder Logic, Panel Wiring and much more. Call for session specifics!
Cost Per Person:  $180.00

Register Today:  E-mail training@sydist.com or call 1-800-998-1621, then press 7.


Panel Wiring (Level 11) (FEMS - LEVEL 11)
Event Date(s) & Time(s):  10/01/2015 - 10/02/2015   |   8:30am-4:30pm
Location:
  850 Smile Way, York PA 17404
Course Description:  The Fundamental Electrical Maintenance Skills classes provide a foundation for electrical workers, maintenance and others, to better understand electrical systems and controls.  The classes provide a basic knowledge base from which to build a better understanding of electrical distribution systems, motion systems and machine control.  The classes build upon each other to form a well rounded set of fundamental principles on which all electrical and electronic systems are built.  These classes provide a good starting point for an individual interested in gaining an understanding of Ohm's Law, Power, Energy, Inductance, Capacitance, Power Factor, Electrical Components, Electrical Symbols, Electrical Schematics, Induction Motors, Ladder Logic, Panel Wiring and much more. Call for session specifics!
Cost Per Person:  $510.00

Register Today:  E-mail training@sydist.com or call 1-800-998-1621, then press 7.


Advanced Motors (Level 13) (FEMS - LEVEL 13)
Event Date(s) & Time(s):  10/08/2015   |   1pm- 5pm
Location:
  850 Smile Way, York PA 17404
Course Description:  The Fundamental Electrical Maintenance Skills classes provide a foundation for electrical workers, maintenance and others, to better understand electrical systems and controls.  The classes provide a basic knowledge base from which to build a better understanding of electrical distribution systems, motion systems and machine control.  The classes build upon each other to form a well rounded set of fundamental principles on which all electrical and electronic systems are built.  These classes provide a good starting point for an individual interested in gaining an understanding of Ohm's Law, Power, Energy, Inductance, Capacitance, Power Factor, Electrical Components, Electrical Symbols, Electrical Schematics, Induction Motors, Ladder Logic, Panel Wiring and much more. Call for session specifics!
Cost Per Person:  $180.00

Register Today:  E-mail training@sydist.com or call 1-800-998-1621, then press 7.


Introduction to Industrial Electronics (Level 12) (FEMS - LEVEL 12)
Event Date(s) & Time(s):  10/08/2015   |   8:00am- 12:00pm
Location:
  850 Smile Way, York PA 17404
Course Description:  The Fundamental Electrical Maintenance Skills classes provide a foundation for electrical workers, maintenance and others, to better understand electrical systems and controls.  The classes provide a basic knowledge base from which to build a better understanding of electrical distribution systems, motion systems and machine control.  The classes build upon each other to form a well rounded set of fundamental principles on which all electrical and electronic systems are built.  These classes provide a good starting point for an individual interested in gaining an understanding of Ohm's Law, Power, Energy, Inductance, Capacitance, Power Factor, Electrical Components, Electrical Symbols, Electrical Schematics, Induction Motors, Ladder Logic, Panel Wiring and much more. Call for session specifics!
Cost Per Person:  $180.00

Register Today:  E-mail training@sydist.com or call 1-800-998-1621, then press 7.


Digital Electrical Principles (Level 14) (FEMS - LEVEL 14)
Event Date(s) & Time(s):  10/15/2015   |   8:00am- 12:00pm
Location:
  850 Smile Way, York PA 17404
Course Description:  The Fundamental Electrical Maintenance Skills classes provide a foundation for electrical workers, maintenance and others, to better understand electrical systems and controls.  The classes provide a basic knowledge base from which to build a better understanding of electrical distribution systems, motion systems and machine control.  The classes build upon each other to form a well rounded set of fundamental principles on which all electrical and electronic systems are built.  These classes provide a good starting point for an individual interested in gaining an understanding of Ohm's Law, Power, Energy, Inductance, Capacitance, Power Factor, Electrical Components, Electrical Symbols, Electrical Schematics, Induction Motors, Ladder Logic, Panel Wiring and much more. Call for session specifics!
Cost Per Person:  $180.00

Register Today:  E-mail training@sydist.com or call 1-800-998-1621, then press 7.




Customers complete all 14 courses in our Fundamental Electrical Maintenance Skills program!

Congratulations to Patrick Grogan (Dal-Tile), Norm Fink (JST Corp.), Cameron Killian (Stoner Inc.), Samuel Langley (Dal-Tile), Ed Spayd (HRG Engineering), Gregory Burkholder (Schreiber Foods), Sean Corley (ES3, LLC), and Todd Hall (Schreiber Foods) for completing all 14 courses from our Fundamental Electrical Maintenance Skills training category.

Click here for full size version of the photo.

Customer Testimonials

Harley applied everything that we covered to real world industrial situations. I have had very few instructors or teachers in my life that conveyed the information in the way that he did - he always made sure that everyone in the class grasped a concept before moving on to the next.

I would recommend anyone who wants to learn electrical principals and how components work to attend these classes. I cannot put a price on the knowledge and confidence I received from attending these classes.

Cameron Killian
Engineering Technician
Stoner Inc.



After taking the Fundamental Electrical Maintenance Skills - Panel Wiring course I found myself in a panel that was not working. I knew immediately what I was looking at, found and fixed the problem. This hands-on course is perfect for sharpening your troubleshooting skills! Great training!

Vince A.



 

Contact Us
 
 
Email:
training@sydist.com

 
 
Phone:
1-800-998-1621
Press "7" for Training & Events
 
 

   
Training Schedule
 
April - September 2015
   • Download pdf version