Schaedler Yesco | Killark

All Products

Filter

Search Within Brand

: In Stock
: 3P (12)
DP (9)
DPDT (NO OFF) (2)
DPST (4)
Maintained (20)
Momentary (51)
Push buttons (3)
Rotary (20)
SP (36)
SPDT (3-way) (8)
: 2 Position Key Selector Switch (4)
2 Position Selector Switch (13)
3 Position Key Selector Switch (3)
3 Position Selector Switch (10)
Double Pilot Light (4)
Double Pushbutton (11)
Double Pushbutton and Pilot Light (3)
Gound Fault Interupter (3)
Handle (6)
Lever (53)
: 0.025 A (13)
0.06 to 0.15 A (2)
0.07 A (2)
10 A (106)
100 A (16)
15 A (13)
20 A (50)
200 A (3)
240m/540m A (3)
250m A (8)
: 90º Plugged Elbows: To change direction 90º in rigid or IMC conduit systems where space is limited and access is needed for pulling conductors or maintenance. (2)
90º pulling elbows are used to accommodate pulling conductors through a sharp bend in the conduit system. (6)
Accommodates wiring devices and provides opening to splice, tap, or pull conductors. Provide access to conductors for maintenance and future system changes. (93)
Conduit hubs provide a liquid tight, oil tight and dust tight termination of electrical conduit through the walls of sheet metal enclosures. The hubs fit into standard knock-out dimensions. (8)
Designed for use with jacketed interlocked and continuously welded/corrugated armor cable where it is essential to provide positive grounding of cable armor and a NEMA 3, 4, 4X connection. e.g. TEC or MC type cable. Use outdoors or indoors. (2)
Designed to permit straight pulls of heavy cable. (4)
Designed to secure rigid metal conduit, IMC or EMT across, parallel or perpendicular to channel, beam, and angle supports. (11)
FXS ground fault interrupters are designed to interrupt a circuit when a ground fault is detected on equipment which may be handled by personnel in hazardous locations. (3)
FXS tumbler switches are suitable for applications where making, breaking, or changing connections in an electrical circuit is required and where conditions of load do not exceed the switch ratings. (23)
For overhead service entrance. For use with threaded rigid conduit. (6)
: Constant wattage autostransformer (7)
High reactance autotransformer (5)
T8 electronic fluorescent (5)
: Bracket (4)
Trunnion (5)
: 0.50 (59)
0.75 (97)
1 (43)
1.25 (12)
1.5 (16)
2 (9)
: Amber (6)
Black (66)
Black-Black (3)
Black/Gray (3)
Blue (4)
Blue-Green (3)
Bronze (78)
Brown (5)
Colorless (10)
Gray (1379)
: Jar and brush (2)
Screws and washers (18)
Screws, marking strips, and end clip (2)
: 1-NC (9)
1-NO (12)
1-NO/1-NC (58)
2-NO (7)
2-NO/2-NC (23)
: 7200 VA (make), 720 VA (break), 10A cont. @ 600V AC; 2.5A cont. @ 600V DC. (2)
NEMA A600 - 7200 VA (make), 720 VA (break), 10A cont. @ 600V AC (thermal); NEMA Q300 - 69 VA (make & break), 2.5A cont. @ 250V DC (thermal). (5)
: Plastic container with pry-off lid (4)
: G, W, S, SO, STO, or similar (15)
S, SO, ST, STO, SOO, SOW, or SOOW (3)
S, SO, ST, or STO (4)
: CA (7)
CN (136)
GB (2)
HU (2)
IN (161)
MX (736)
US (890)
USA (19)
: 13.5 cu. in. (3)
14 cu. in. (5)
18 cu. in. (55)
19 cu. in. (36)
25 cu. in. (3)
28 cu. in. (4)
28.5 cu. in. (9)
29 cu. in. (24)
32 cu. in. (11)
33 cu. in. (4)
: Aluminum enclosure (73)
Aluminum factory sealed dead-end splice box (30)
Aluminum factory sealed feed-thru splice box (29)
Aluminum housing (5)
Aluminum junction box (4)
Bolted (4)
: Corrosive enviroments (3)
Hazardous and Wet Locations (27)
Hazardous locations (254)
Wet and hazardous locations (79)
Wet and/or hazardous conditions (6)
Wet locations (5)
: Electrostatically applied polyester finish (2)
Epoxy (6)
Galvanized (11)
Natural (204)
Natural finish (8)
Polyester Powder (2)
Powder Coat (89)
Powder Epoxy Paint (589)
Zinc Electroplated (6)
Zinc Plated (75)
: Baked powder epoxy finish, electrostatically applied (2)
Bronze electrostatically applied powder-coat finish (2)
Natural (3)
Powder Epoxy Paint (13)
: Aluminum (2)
Copper-free aluminum (less than 4/10 of 1%) (17)
Fiberglass reinforced polyester (4)
Glass (3)
: Aluminum Pulse Start Metal Halide Floodlight (2)
: Rigid or IMC conduit (13)
: Form 7 (178)
Form 8 (61)
: 50/60 Hz (21)
60 Hz (17)
: 0.0625 in (4)
0.1 in (51)
0.125 in (13)
0.312 in (4)
0.375 in (3)
0.625 in (3)
0.81 in (6)
0.83 in (4)
0.99 in (3)
1 in (74)
: 0.5 in (148)
0.5/0.75 in (3)
0.75 in (161)
0.75/1.25 in (2)
0.75/2 in (2)
1 in (137)
1 to 1-1/2 in (2)
1 to 1-1/4 in (2)
1.25 in (88)
1.25/1.5 in (8)
: None (3)
Nylon (26)
: No (163)
: No (52)
Yes (8)
: Fluorescent (4)
Incandescent (2)
LED (5)
Medium Base (7)
Mogul Base (6)
T8 (3)
: 1 in (36)
1.32 in (4)
1.9 in (3)
10 in (23)
10.12 in (10)
10.125 in (3)
10.25 in (14)
10.31 in (8)
10.375 in (6)
10.5 in (5)
: Aluminum (8)
Aluminum, Copper Free (less than 4/10 of 1%) (766)
Body-Copper-free aluminum; Contacts-Brass; Spring tensioner-Patented beryllium copper; External screws-316 stainless steel (41)
Bronze (63)
Cement (4)
Copper-Free Aluminum (169)
Copper-free aluminum alloy (2)
Fiber (5)
Fiber, Mineral Wool (3)
Glass (12)
: 0.75/1 hp (3)
1 hp (3)
2/3 hp (6)
2/3/5 hp (2)
2/7.5/10 hp (3)
: Bi-directional ductile mounting lugs (9)
Cast mounting lugs (23)
Ceiling (14)
Ductile mounting lugs (31)
Luminaire Only (8)
Mounting Holes (17)
Mounting lugs (24)
Pendant;Surface (6)
Trunnion (8)
Wall Bracket (4)
: 3, 4, 4X (41)
3, 4, 4X, 7(B, C, D), 9(E, F, G) (5)
3, 4, 4X, 7(B, C, D), 9(F, G) (4)
4, 4X, 12, 13 (10)
7 (C, D) (3)
NEMA 3, 4 (3)
NEMA 3, 4, 4X (53)
NEMA 3, 4, 4X, 7BCD, 9FG (12)
NEMA 3, 7BCD, 9FG (4)
: 1 (60)
2 (20)
3 (8)
: 2 (10)
3 (35)
4 (21)
: 0 (79)
1 (3)
: 1 (111)
2 (74)
3 (59)
4 (23)
: 10,000 hrs (17)
10k (4)
: 6.03 in (2)
: 1 (23)
3 (32)
: 0.9 (5)
: 150 W (3)
400 W (3)
: 150W (3)
30º angle (3)
Dome (4)
Specular aluminum (2)
Steel Reflector (7)
: Lever (17)
Push button (3)
: L-Shape (2)
Rectangle (4)
: 1 in x 1 in x 2 in (28)
1 in x 1 in x 3 in (6)
1 in x 3 in x 3 in (23)
1-3/8"" H x 1-3/8"" W x 1-25/32"" L (2)
1-35/64" H x 1-35/64" W x 4-3/8" L (3)
1-35/64"" H x 1-35/64"" W x 5-3/8"" L (3)
1.13 in x 0.55 in x 1.1 in (12)
1.29 in x 0.55 in x 1.1 in (5)
1.4 in x 0.55 in x 1.5 in (3)
1.69" H x 1.69" W x 3.36" L (4)
: E-26 medium base (2)
G13 snap-in T12-T8 (4)
Medium base, 4KV pulse rated (600W/600V) (4)
Mogul base, 4KV pulse rated (1500W/600V) (6)
: A raised dome cover permits additional wiring room. Furnished with captive ss screws and gasket. (3)
A raised dome cover permits additional wiring room. Furnished with captive ss screws and gasket. Volume is 149 cu. in. (2)
A raised dome cover permits additional wiring room. Furnished with captive ss screws and gasket. Volume is 319 cu. in. (2)
A raised dome cover permits additional wiring room. Furnished with captive ss screws and gasket. Volume is 36 cu. in. (2)
A raised dome cover provides additional wiring room. Furnished with cover and gasket. (9)
A raised dome cover provides additional wiring room. Furnished with cover and gasket. Volume is 100 cu. in. (2)
A raised dome cover provides additional wiring room. Furnished with cover and gasket. Volume is 2.9 cu. in. (2)
Aluminum construction resists corrosion. Neoprene grommet seals out oil and moisture. Nylon retention ring ensures superior holding power. (23)
Aluminum fittings are strong, durable, and corrosion resistant. Internal grommet provides liquidtight seal. Stainless steel mesh grips resist corrosion, prevent cord pull-out, and control arc-of-bend. (9)
Aluminum. 316 stainless steel screws. Natural finish. (12)
: 2.7 (4)
: CSA (7)
CSA, FM APPROVED (13)
CSA, FM APPROVED, ATEX, IECEx (9)
UL (23)
UL, CSA (1479)
UL, CSA, ATEX (5)
UL, CSA, ATEX, IECEx (14)
UL, CSA, FM APPROVED (97)
UL, CSA, FM APPROVED, ATEX, IECEx (2)
UL, cCSAus, FM APPROVED (3)
: 30º angle reflector (3)
Blue green globe (2)
Ceiling mount splice box (10)
Clear globe (4)
Dome reflector (4)
Double-ended lamp type fluorescent fixture (5)
Factory sealed photocell field kit (4)
Fixture body (4)
Fixture body to splice box gasket (3)
Fluorescent fixture (3)
: ACCEPTOR (11)
CERTILITE V (5)
CLENCHER (5)
CORROSAFE 7 (65)
DURALOY 5 (103)
DURALOY 7 (100)
DURALOY 8 (56)
HOSTILELIGHT (2)
HOSTILELITE (3)
K-PAK (17)
: -50°C to +60°C (4)
: 10 mg/m³ (4)
: 0.5 in (3)
0.75 in (2)
: 40% Fill Sealing Fitting (18)
45 Degree Elbow (13)
45 Degree Liquidtight Insulated Connector (7)
90 Degree Liquidtight Insulated Connector (6)
90 Degree Liquidtight Non-Insulated Connector (3)
90º Angle Union (4)
90º Cord Connector (4)
90º Elbow (18)
90º Plugged Elbow (2)
Aluminum Box And Cover With 2-Position Selector Switch (3)
: 110 to 120 V (3)
115/230 VAC (3)
115/230/460 VAC (6)
115/230/575 VAC (11)
120 V (9)
120 VAC (12)
120 to 277 V (6)
120 to 277 VAC (22)
120/277 VAC (39)
120/600 VAC (8)
: 150 W (6)
26 W (2)
3 W (37)
300 W (6)
32 W (8)
: 0.625 in (2)
0.968 in (2)
1 in (15)
1.3125 in (5)
1.32 in (4)
1.375 in (10)
1.44 in (3)
1.5 in (11)
1.625 in (12)
1.69 in (6)
: #10 AWG, #12 AWG, or #14 AWG (3)
#12 or #14 AWG (4)
Regular stranding: #1-250; extra flex: #1-250 (3)
Regular stranding: #10-#6; extra flex: #10-#8 (25)
Regular stranding: #10-#6; extra flex: #10-#9 (3)
Regular stranding: #4-#2; extra flex: #4-#2 (11)
Regular stranding: #6-#4; extra flex: #6-#4 (17)

Results Per Page

2597 items

Sort by

content loaded

Compare

Killark

KLRK 170

Part #KLRK 170 1/2" CONDULET COVER STEEL FORM7 Killark® Duraloy® 7 Conduit Body Cover, Stamped, 1/2 in Hub, For Use With: Duraloy® 7 Series Fitting, Steel, Galvanized/Natural, 3-11/16 in L x 1-3/8 in W x 5/16 in H

MFG #170

$3.90 per EA (1) / EA

U/M

QTY

Compare

Killark

KLRK 170SA

Part #KLRK 170SA 1/2" CONDULET COVER ALUMINUM FORM7 Killark® CORROSAFE 7 Conduit Body Cover, Stamped, 1/2 in Hub, For Use With: Duraloy® 7 Series Fitting, Aluminum, Natural, 3-11/16 in L x 1-3/8 in W x 5/16 in H

MFG #170SA

$4.86 per EA (1) / EA

U/M

QTY

Compare

Killark

KLRK 1FA

Part #KLRK 1FA 1 GANG DUPLEX RECEPTACLE COVER FOR FS/FD BOX ALUMINUM Killark® Device Box Cover, Series: FS/FD, 1 Gang, 4-9/16 in Length, 2.813 in Width, Duplex Receptacle Cover, Surface Mount, Stamped Aluminum, Gray

MFG #1FA

$8.72 per EA (1) / EA

U/M

QTY

Compare

Killark

KLRK 1FB

Part #KLRK 1FB 1 GANG BLANK COVER FOR FS/FD BOX ALUMINUM Killark® Device Box Cover, Series: FS/FD, 1 Gang, 4-9/16 in Length, 2.813 in Width, Blank Cover, Surface Mount, Stamped Aluminum, Gray

MFG #1FB

$5.20 per EA (1) / EA

U/M

QTY

Compare

Killark

KLRK 1FG

Part #KLRK 1FG 1 GANG SINGLE RECPTACLE COVER FOR FS/FD BOX 1-5/8" ROUND OPENING ALUMINUM Killark® Device Box Cover, Series: FS/FD, 1 Gang, 4-9/16 in Length, 2.813 in Width, Receptacle Cover, Surface Mount, Stamped Aluminum, Gray

MFG #1FG

$8.72 per EA (1) / EA

U/M

QTY

Compare

Killark

KLRK 1FR

Part #KLRK 1FR 1 GANG SINGLE RECPTACLE COVER FOR FS/FD BOX 1-13/32" ROUND OPENING ALUMINUM Killark® Device Box Cover, Series: FS/FD, 1 Gang, 4-9/16 in Length, 2.813 in Width, Receptacle Cover, Surface Mount, Stamped Aluminum, Gray

MFG #1FR

$8.72 per EA (1) / EA

U/M

QTY

Compare

Killark

KLRK 1FT

Part #KLRK 1FT 1 GANG SINGLE TOGGLE SWITCH COVER FOR FS/FD BOX ALUMINUM Killark® Device Box Cover, Series: FS/FD, 1 Gang, 4-9/16 in Length, 2.813 in Width, Toggle Switch Cover, Surface Mount, Stamped Aluminum, Gray

MFG #1FT

$8.72 per EA (1) / EA

U/M

QTY

Compare

Killark

KLRK 270

Part #KLRK 270 3/4" CONDULET COVER STEEL FORM7 W/GASKET Killark® Duraloy® 7 Conduit Body Cover, Stamped, 3/4 in Hub, For Use With: Duraloy® 7 Series Fitting, Steel, Galvanized/Natural, 4-1/4 in L x 1-1/2 in W x 5/16 in H

MFG #270

$4.68 per EA (1) / EA

U/M

QTY

Compare

Killark

KLRK 170

MFG #170

$3.90 per EA (1) / EA

U/M

QTY

Compare

Killark

KLRK 170SA

MFG #170SA

$4.86 per EA (1) / EA

U/M

QTY

Compare

Killark

KLRK 1FA

MFG #1FA

$8.72 per EA (1) / EA

U/M

QTY

Compare

Killark

KLRK 1FB

Part #KLRK 1FB 1 GANG BLANK COVER FOR FS/FD BOX ALUMINUM Killark® Device Box Cover, Series: FS/FD, 1 Gang, 4-9/16 in Length, 2.813 in Width, Blank Cover, Surface Mount, Stamped Aluminum, Gray

MFG #1FB

$5.20 per EA (1) / EA

U/M

QTY

Compare

Killark

KLRK 1FG

MFG #1FG

$8.72 per EA (1) / EA

U/M

QTY

Compare