LEV ODS15-IDW
MFG #ODS15-IDW
SKU #3717168
$87.63 per EA (1) / EA
12 in Stock. More available 06/04/2024
Stock Item
Product description
LEV ODS15-IDW OCCUPANCY SENSOR WALL MOUNT SELF ADJUSTING WHITE PASSIVE INFRARED 1800WATT@120VAC INCANDESCENT 1800VA @120VAC 4000VA@277VAC FLUOR LOAD
Leviton Decora Occupancy Sensor, 1-Pole Low-Profile Photocell Controlled Single Relay, 120/230/277 VAC, 100/280 mW, PIR Sensor, 2100 sq-ft Coverage, 180 deg Viewing, 30 s to 20 min Delay, Fluorescent/Incandescent Lamp, 50/60 Hz Response, Manual On/Automatic Off Control Output, Wall Mount, 0 to 50 deg C, White, 46 in H x 1.75 in W x 1.83 in D
Leviton Decora Occupancy Sensor, 1-Pole Low-Profile Photocell Controlled Single Relay, 120/230/277 VAC, 100/280 mW, PIR Sensor, 2100 sq-ft Coverage, 180 deg Viewing, 30 s to 20 min Delay, Fluorescent/Incandescent Lamp, 50/60 Hz Response, Manual On/Automatic Off Control Output, Wall Mount, 0 to 50 deg C, White, 46 in H x 1.75 in W x 1.83 in D
- Small Offices, Heavier Loads, Private Restrooms, Lounges, Storage Areas, Classrooms, Conference Rooms and Commercial Applications
- Leviton Decora Occupancy Sensor, 1-Pole Low-Profile Photocell Controlled Single Relay, 120/230/277 VAC, 100/280 mW, PIR Sensor, 2100 sq-ft Coverage, 180 deg Viewing, 30 s to 20 min Delay, Fluorescent/Incandescent Lamp, 50/60 Hz Response, Manual On/Automatic Off Control Output, Wall Mount, 0 to 50 deg C, White, 46 in H x 1.75 in W x 1.83 in D
- Exclusive Leviton® high inrush stability (HIS) circuitry, specifically designed to handle today's high inrush electronic ballast loads and offer unmatched durability and service
Low profile design eliminates obtrusive "scanning device" look
Convenient pushbutton provides manual ON/OFF light switching at any time
Two dual element PIR sensors used to widen detection range, relay switches at the zero crossing point of the AC power curve to ensure maximum contact life and compatibility with electronic ballasts
Segmented fresnel lens provides optimum sensitivity and performance designed with an extensive "minor motion" area where even slight body movements will be detected
Vandal resistant PIR lens, 1-unit can be used for 120 to 277 VAC lighting, compatible with both electronic and magnetic ballasts
Horizontal field-of-view may be adjusted between 180 and 60 deg of arc by using integral blinders located on either side of the lens, no masking tape required
Manual ON/auto OFF mode for installations where manual ON switching is required but auto OFF switching is still desired for CEC title T24 energy savings
To comply with T24, red LED indicator light flashes when sensor detects motion to verify detection is active
Time delay in adapting mode, the time delay can be configured from 30 sec (test mode), 5, 10 and 20 min, in non-adapting mode, the delay can be configured from 5, 10, 20 and 30 min
Light sensor adjustable ambient light override ranges from approximately 20 to 5000+ LUX to prevent lights from turning ON automatically during periods of ample natural light, increasing energy savings
Light sensor enables the load hold OFF feature once level has been set, no neutral design is optional for retrofit applications
Self-adjusting delayed OFF time interval compensates for real time occupancy patterns, preventing unnecessary ON/OFF switching
Exclusive Walk-through feature provides increased energy savings by not leaving the lights ON for an extended period after only momentary occupancy
Vacancy confirmation when the time out expires and the relays turns OFF, a 30 sec vacancy confirmation exists to turn the relays back ON
False detection circuitry
Presentation mode feature for slide or film presentations allows pushbuttons to turn lights OFF and keep them OFF while the room is occupied
Additional manual service switch provided for installer to force lights to hold OFF or hold-ON during installation
Beep warn - unit beeps 3 times after delayed OFF time expires, then waits 10 sec before turning lights OFF
Exclusive Leviton® high inrush stability (HIS) circuitry, specifically designed to handle today's high inrush electronic ballast loads and offer unmatched durability and service
- SENSOR OCCUPANCY 120/230/277VAC PIR WALL
- Product Catalog Page(s)
MSDS
Specification Sheet
- UL Listed|CSA 24|FCC Approve|NOM Certified
- Brand: LevitonApplication: CommercialCountry of Origin: CNEnvironmental Conditions: Operating Temperature (0 to +50 DEG C);Storage Temperature (-10 to +85 DEG C);Humidity (20% to 90% Non-Condensing)Frequency Rating: 50/60 HzMounting: WallPower Consumption: 100 @ 120V;280 @ 277VSize: 46 H x 1.75 W x 1.83 D INStandard: UL Listed;CSA Certified (24);FCC Regulations;NOM CertifiedSub Brand: DecoraSupply Voltage: 120/230/277 VACType: Occupancy Sensor;Single-Pole Switch