Filter
1701 items
content loaded
Part #MTAL JBHC49 1/4"-20 X 1-1/4" HEX HEAD CAP BOLT GRADE 2 STEEL 100/PK Metallics Cap Screw, Measurement System: Imperial, 1/4-20 Thread, 1-1/4 in Length Under Head, 2 Grade, Steel, Zinc Chromate, UNC Thread, 0.428 to 0.438 in W x 0.15 to 0.163 in H Head
MFG #JBHC49
2800 in Stock. More available 05/31/2026
$0.41/EA
Part #MTAL JGSH20 #10-32 X 3/8" GREEN GROUND SCREW QUAD DRIVE THREAD CUTTING SLOT/ PHILLIPS DOG POINT 100/PK Metallics Combination Grounding Screw, Series: JGSH, #10-32 Screw, 3/8 in Overall Length, Indented Hex/Washer Head, 0.305 to 0.312 in W x 0.105 to
MFG #JGSH20
22499 in Stock. More available 05/31/2026
$0.26/EA
Part #MTAL WAKJ19S #10 SHEET METAL SCREW KIT HEX HEAD (100)#10 X 1-1/4" SCREWS (100) SUPER YELLOW PLASTIC ANCHORS W/ 1/4" MASONRY BIT JAR Metallics Wall Anchor Kit, Conical, 201 Piece, 1/4 in Dia, Plastic, Yellow
MFG #WAKJ19S
36 in Stock. More available 06/01/2026
$41.41/EA
Part #MTAL JRWV37212 3/8 WOOD ROD HANGER 5/16 x 2-1/2" VERTICAL MOUNT,25/JR Metallics Wood Screw, 5/16 in Diameter, 3/8-16 Rod, Vertical Mount, Steel, 2-1/2 in Overall Length, Zinc Plated
MFG #JRWV37212
1134 in Stock. More available 05/31/2026
$4.53/EA
Part #MTAL JN165 3/8" HEX NUT STEEL 100/PK ZINC PLATED Metallics Hexagon Nut, Measurement System: Imperial, 3/8-16 Thread, Steel, Zinc Plated, Material Grade: 2, Right Thread, 5/8 in Width Across Flats, UNC Thread, Silver
MFG #JN165
13399 in Stock. More available 05/31/2026
$0.23/EA
Part #MTAL JSW75 3/8" FLAT WASHER 13/32" ID X 13/16" OD STEEL 100/PK Metallics Flat Washer, 3/8 in Nominal, 13/32 in ID, 13/16 in OD, 0.05 in Thickness, Silver, Steel, Zinc Chromate
MFG #JSW75
11353 in Stock. More available 05/31/2026
$0.17/EA
Part #MTAL JSLW9 3/8" SPLIT LOCK WASHER STAINLESS STEEL 100/PK Metallics Split Lockwasher, Measurement System: Imperial, 3/8 in Nominal, Stainless Steel, 3/8 in ID, 0.688 in OD, Material Grade: 18-8
MFG #JSLW9
500 in Stock. More available 05/15/2026 and 05/31/2026
$1.00/EA
Part #MTAL CS1 CORDSAFE HOLDS CORDS TOGETHER WATER RESISTANT Metallics Cordsafe Device, Plastic
MFG #CS1
158 in Stock. More available 05/31/2026
$13.89/EA
Part #MTAL JW127 3/8" X 1" FENDER WASHER 100/PK Metallics Fender Washer, Flat SAE, 3/8 in Inside Dia, 1 in Outside Dia, Steel, Zinc Chromate
MFG #JW127
4000 in Stock. More available 05/31/2026
$0.25/EA
Part #MTAL RCT28 3/8" HEX X 1" THREADED BOLT ROD COUPLING HEX STEEL Metallics Hex Rod Coupling Nut, UNC Thread, 3/8-16 Thread, 1/2 in Width, Steel, Silver, Zinc Chromate
MFG #RCT28
2141 in Stock. More available 05/31/2026
$1.15/EA
Part #THREAD 3/8BR6 3/8" X 6' THREADED STEEL BOLT ROD GALV ZINC PLATED SOLD PER EACH PIECE NOT BY FOOT Metallics Threaded Rod, 3/8-16 Thread, 6 ft Overall Length, Steel, Zinc Chromate
MFG #3/8BR6
3959 in Stock. More available 06/06/2026
$6.73/EA
Part #MTAL J1408 3/8" X 1-5/16" MACHINE SCREW LEAD ANCHOR 3/4" HOLE SIZE 50/PK Metallics Machine Screw Anchor, 3/8 in Diameter, 1-5/16 in Overall Length, Lead Alloy, 1-1/4 in Minimum Embedment Depth, 3/4 in Drill, Plain, Applicable Materials: Cement Floors
MFG #J1408
1136 in Stock. More available 05/31/2026
$4.29/EA
Part #MTAL SPN38 3/8" NEOPRENE/STEEL CABLE CLAMP Metallics Cable Clamp, Insulated Wrapped, Series: SPN, 3/8 in Cable, Threaded Mount, 3/16 in Mounting Screw Dia, Silver, Black Color, Steel, Electro-Plated
MFG #SPN38
240 in Stock. More available 05/31/2026
$5.53/EA
Part #MTAL JEB8 3/8"X5" EYEBOLTW/NUT 25PK 1"OPEN'G Metallics Eye Bolt, 3/8-16 Thread, Steel, Zinc Chromate, 1 in ID Eye, 1.69 in OD Eye, UNC Thread, 5 in Overall Length, 3 in Thread Length, 2 Grade
MFG #JEB8
412 in Stock. More available 05/15/2026 and 05/31/2026
$3.02/EA
Part #MTAL JTEKD10 #14 X 1" 3/8" HD SELF DRILLING/TAPPING TEK SCREW HEX WASHER HEAD STEEL 100/PK Metallics Self-Drilling and Tapping Screw, Measurement System: Imperial, #14-14 Thread, 1 in Overall Length, Hex Washer Head, Hex Drive, Steel, Zinc Chromate,
MFG #JTEKD10
700 in Stock. More available 05/31/2026
$0.55/EA
Part #MTAL TP105SFC 8-32X1/2 FLAT HEAD HEX PIN T FACTORY NON-STOCK, NON-RETURNABLE Metallics Machine Screw, Tamper Resistant, Measurement System: Imperial, #8-32 Thread, 1/2 in Overall Length, 18-8 Stainless Steel, Flat Head, Hex Pin Drive, 5/32 in Drive,
MFG #TP105SFC
100 in Stock. More available 06/01/2026
$2.00/EA
Part #MTAL JBHC23 3/8" X 1-1/2" HEX HEAD CAP BOLT GRADE 2 STEEL 100/PK Metallics Cap Screw, Measurement System: Imperial, 3/8-16 Thread, 2 Grade, Steel, Zinc Chromate, UNC Thread, 0.226 to 0.243 in H x 0.551 to 0.562 in W Head, Hex Head
MFG #JBHC23
5600 in Stock. More available 05/31/2026
$0.77/EA
Part #MTAL JC12 #12 JACK CHAIN STEEL 50' BOX WORK LOAD 29LBS Metallics Jack Chain, Single, #10, 29 lb, For Use With: MSCU and MSCUR Improved Swivel Fixture Hanger, 3/8 in Across Link, 0.75 in L x 0.25 in W Inside Link, Steel, Bright Galvanized, 50 ft L
MFG #JC12
6250 in Stock. More available 05/31/2026
$1.29/FT
Part #MTAL JDS152 #8 X 1/2" 1/4" HD SHEET METAL SCREW SLOTTED /HEX WASHER HEAD 100/PK Metallics Sheet Metal Screw, Measurement System: Imperial, #8-15 Thread, 1/2 in Overall Length, Indented Hex/Washer Head, Slotted Drive, Steel, Zinc Chromate, Self-Pierci
MFG #JDS152
3600 in Stock. More available 05/31/2026
$0.13/EA
Part #MTAL JTEKD19 #10 X 1-1/2" 5/16" HD SELF-DRILLING/TAPPING TEK SCREW HEX WASHER HEAD STEEL 100/PK Metallics Self-Drilling and Tapping Screw, #10-16 Thread, 1-1/2 in Overall Length, Hex Washer Head, Hex Drive, Steel, Zinc Chromate, Self-Drilling Point,
MFG #JTEKD19
7700 in Stock. More available 05/31/2026
$0.35/EA
Part #MTAL JW114 1/4" X 1-1/2" FENDER WASHER 100/PK Metallics Fender Washer, Flat SAE, 1/4 in Inside Dia, 1-1/2 in Outside Dia, Steel, Zinc Chromate
MFG #JW114
4900 in Stock. More available 05/31/2026
$0.37/EA
Part #MTAL JTS23 8X1-1/2 PHIL TPG SCREW Metallics Tapping Screw, Combination, Measurement System: Imperial, #8-15 Thread, 1-1/2 in Overall Length, Pan Head, Phillips®/Slotted Drive, Steel, Zinc Chromate, #2 Drive, 0.105 to 0.115 in H x 0.306 to
MFG #JTS23
1700 in Stock. More available 05/31/2026
$0.16/EA
Part #MTAL JRM140 #6-32 X 2-1/2" ROUND HEAD MACHINE SCREW STEEL SLOTTED/PHILLIPS 100/PK Metallics Machine Screw, Combination, Measurement System: Imperial, #6-32 Thread, 2-1/2 in Overall Length, Steel, Round Head, Zinc Chromate, Phillips®/Slotte
MFG #JRM140
400 in Stock. More available 05/31/2026
$0.23/EA
Part #MTAL J3717 3/8X1-7/8 HEX HD ANCH Metallics Sleeve Anchor, 3/8 in Diameter, 3/8-16 Thread, Steel, Hex Head, Zinc Chromate, 1-1/4 in Minimum Embedment Depth, UNC Thread, 1-7/8 in Overall Length, 1/2 in Head, 3/8 in Drill, 3250 psi Shear Strength, 2700
MFG #J3717
750 in Stock. More available 05/31/2026
$2.56/EA
Part #MTAL JBHC49 1/4"-20 X 1-1/4" HEX HEAD CAP BOLT GRADE 2 STEEL 100/PK Metallics Cap Screw, Measurement System: Imperial, 1/4-20 Thread, 1-1/4 in Length Under Head, 2 Grade, Steel, Zinc Chromate, UNC Thread, 0.428 to 0.438 in W x 0.15 to 0.163 in H Head
MFG #JBHC49
2800 in Stock. More available 05/31/2026
$0.41/EA
Part #MTAL JGSH20 #10-32 X 3/8" GREEN GROUND SCREW QUAD DRIVE THREAD CUTTING SLOT/ PHILLIPS DOG POINT 100/PK Metallics Combination Grounding Screw, Series: JGSH, #10-32 Screw, 3/8 in Overall Length, Indented Hex/Washer Head, 0.305 to 0.312 in W x 0.105 to
MFG #JGSH20
22499 in Stock. More available 05/31/2026
$0.26/EA
Part #MTAL WAKJ19S #10 SHEET METAL SCREW KIT HEX HEAD (100)#10 X 1-1/4" SCREWS (100) SUPER YELLOW PLASTIC ANCHORS W/ 1/4" MASONRY BIT JAR Metallics Wall Anchor Kit, Conical, 201 Piece, 1/4 in Dia, Plastic, Yellow
MFG #WAKJ19S
36 in Stock. More available 06/01/2026
$41.41/EA
Part #MTAL JRWV37212 3/8 WOOD ROD HANGER 5/16 x 2-1/2" VERTICAL MOUNT,25/JR Metallics Wood Screw, 5/16 in Diameter, 3/8-16 Rod, Vertical Mount, Steel, 2-1/2 in Overall Length, Zinc Plated
MFG #JRWV37212
1134 in Stock. More available 05/31/2026
$4.53/EA
Part #MTAL JN165 3/8" HEX NUT STEEL 100/PK ZINC PLATED Metallics Hexagon Nut, Measurement System: Imperial, 3/8-16 Thread, Steel, Zinc Plated, Material Grade: 2, Right Thread, 5/8 in Width Across Flats, UNC Thread, Silver
MFG #JN165
13399 in Stock. More available 05/31/2026
$0.23/EA
Part #MTAL JSW75 3/8" FLAT WASHER 13/32" ID X 13/16" OD STEEL 100/PK Metallics Flat Washer, 3/8 in Nominal, 13/32 in ID, 13/16 in OD, 0.05 in Thickness, Silver, Steel, Zinc Chromate
MFG #JSW75
11353 in Stock. More available 05/31/2026
$0.17/EA
Part #MTAL JSLW9 3/8" SPLIT LOCK WASHER STAINLESS STEEL 100/PK Metallics Split Lockwasher, Measurement System: Imperial, 3/8 in Nominal, Stainless Steel, 3/8 in ID, 0.688 in OD, Material Grade: 18-8
MFG #JSLW9
500 in Stock. More available 05/15/2026 and 05/31/2026
$1.00/EA
Part #MTAL CS1 CORDSAFE HOLDS CORDS TOGETHER WATER RESISTANT Metallics Cordsafe Device, Plastic
MFG #CS1
158 in Stock. More available 05/31/2026
$13.89/EA
Part #MTAL JW127 3/8" X 1" FENDER WASHER 100/PK Metallics Fender Washer, Flat SAE, 3/8 in Inside Dia, 1 in Outside Dia, Steel, Zinc Chromate
MFG #JW127
4000 in Stock. More available 05/31/2026
$0.25/EA
Part #MTAL RCT28 3/8" HEX X 1" THREADED BOLT ROD COUPLING HEX STEEL Metallics Hex Rod Coupling Nut, UNC Thread, 3/8-16 Thread, 1/2 in Width, Steel, Silver, Zinc Chromate
MFG #RCT28
2141 in Stock. More available 05/31/2026
$1.15/EA
Part #THREAD 3/8BR6 3/8" X 6' THREADED STEEL BOLT ROD GALV ZINC PLATED SOLD PER EACH PIECE NOT BY FOOT Metallics Threaded Rod, 3/8-16 Thread, 6 ft Overall Length, Steel, Zinc Chromate
MFG #3/8BR6
3959 in Stock. More available 06/06/2026
$6.73/EA
Part #MTAL J1408 3/8" X 1-5/16" MACHINE SCREW LEAD ANCHOR 3/4" HOLE SIZE 50/PK Metallics Machine Screw Anchor, 3/8 in Diameter, 1-5/16 in Overall Length, Lead Alloy, 1-1/4 in Minimum Embedment Depth, 3/4 in Drill, Plain, Applicable Materials: Cement Floors
MFG #J1408
1136 in Stock. More available 05/31/2026
$4.29/EA
Part #MTAL SPN38 3/8" NEOPRENE/STEEL CABLE CLAMP Metallics Cable Clamp, Insulated Wrapped, Series: SPN, 3/8 in Cable, Threaded Mount, 3/16 in Mounting Screw Dia, Silver, Black Color, Steel, Electro-Plated
MFG #SPN38
240 in Stock. More available 05/31/2026
$5.53/EA
Part #MTAL JEB8 3/8"X5" EYEBOLTW/NUT 25PK 1"OPEN'G Metallics Eye Bolt, 3/8-16 Thread, Steel, Zinc Chromate, 1 in ID Eye, 1.69 in OD Eye, UNC Thread, 5 in Overall Length, 3 in Thread Length, 2 Grade
MFG #JEB8
412 in Stock. More available 05/15/2026 and 05/31/2026
$3.02/EA
Part #MTAL JTEKD10 #14 X 1" 3/8" HD SELF DRILLING/TAPPING TEK SCREW HEX WASHER HEAD STEEL 100/PK Metallics Self-Drilling and Tapping Screw, Measurement System: Imperial, #14-14 Thread, 1 in Overall Length, Hex Washer Head, Hex Drive, Steel, Zinc Chromate,
MFG #JTEKD10
700 in Stock. More available 05/31/2026
$0.55/EA
Part #MTAL TP105SFC 8-32X1/2 FLAT HEAD HEX PIN T FACTORY NON-STOCK, NON-RETURNABLE Metallics Machine Screw, Tamper Resistant, Measurement System: Imperial, #8-32 Thread, 1/2 in Overall Length, 18-8 Stainless Steel, Flat Head, Hex Pin Drive, 5/32 in Drive,
MFG #TP105SFC
100 in Stock. More available 06/01/2026
$2.00/EA
Part #MTAL JBHC23 3/8" X 1-1/2" HEX HEAD CAP BOLT GRADE 2 STEEL 100/PK Metallics Cap Screw, Measurement System: Imperial, 3/8-16 Thread, 2 Grade, Steel, Zinc Chromate, UNC Thread, 0.226 to 0.243 in H x 0.551 to 0.562 in W Head, Hex Head
MFG #JBHC23
5600 in Stock. More available 05/31/2026
$0.77/EA
Part #MTAL JC12 #12 JACK CHAIN STEEL 50' BOX WORK LOAD 29LBS Metallics Jack Chain, Single, #10, 29 lb, For Use With: MSCU and MSCUR Improved Swivel Fixture Hanger, 3/8 in Across Link, 0.75 in L x 0.25 in W Inside Link, Steel, Bright Galvanized, 50 ft L
MFG #JC12
6250 in Stock. More available 05/31/2026
$1.29/FT
Part #MTAL JDS152 #8 X 1/2" 1/4" HD SHEET METAL SCREW SLOTTED /HEX WASHER HEAD 100/PK Metallics Sheet Metal Screw, Measurement System: Imperial, #8-15 Thread, 1/2 in Overall Length, Indented Hex/Washer Head, Slotted Drive, Steel, Zinc Chromate, Self-Pierci
MFG #JDS152
3600 in Stock. More available 05/31/2026
$0.13/EA
Part #MTAL JTEKD19 #10 X 1-1/2" 5/16" HD SELF-DRILLING/TAPPING TEK SCREW HEX WASHER HEAD STEEL 100/PK Metallics Self-Drilling and Tapping Screw, #10-16 Thread, 1-1/2 in Overall Length, Hex Washer Head, Hex Drive, Steel, Zinc Chromate, Self-Drilling Point,
MFG #JTEKD19
7700 in Stock. More available 05/31/2026
$0.35/EA
Part #MTAL JW114 1/4" X 1-1/2" FENDER WASHER 100/PK Metallics Fender Washer, Flat SAE, 1/4 in Inside Dia, 1-1/2 in Outside Dia, Steel, Zinc Chromate
MFG #JW114
4900 in Stock. More available 05/31/2026
$0.37/EA
Part #MTAL JTS23 8X1-1/2 PHIL TPG SCREW Metallics Tapping Screw, Combination, Measurement System: Imperial, #8-15 Thread, 1-1/2 in Overall Length, Pan Head, Phillips®/Slotted Drive, Steel, Zinc Chromate, #2 Drive, 0.105 to 0.115 in H x 0.306 to
MFG #JTS23
1700 in Stock. More available 05/31/2026
$0.16/EA
Part #MTAL JRM140 #6-32 X 2-1/2" ROUND HEAD MACHINE SCREW STEEL SLOTTED/PHILLIPS 100/PK Metallics Machine Screw, Combination, Measurement System: Imperial, #6-32 Thread, 2-1/2 in Overall Length, Steel, Round Head, Zinc Chromate, Phillips®/Slotte
MFG #JRM140
400 in Stock. More available 05/31/2026
$0.23/EA
Part #MTAL J3717 3/8X1-7/8 HEX HD ANCH Metallics Sleeve Anchor, 3/8 in Diameter, 3/8-16 Thread, Steel, Hex Head, Zinc Chromate, 1-1/4 in Minimum Embedment Depth, UNC Thread, 1-7/8 in Overall Length, 1/2 in Head, 3/8 in Drill, 3250 psi Shear Strength, 2700
MFG #J3717
750 in Stock. More available 05/31/2026
$2.56/EA